Self-compacting concrete has soon been around for a decade. Recently the prefabrication industry has started to use this fairly new concrete type in larger scales, mainly because of its distinctive properties.  There are still certain areas that need to be thoroughly examined, such as bond capacity. There have been very few studies regarding shear capacity due to the fact that the procedure is complicated.This report will highlight a method to examine the shear capacity of different surfaces that have been prewetted as well as non-prewetted surfaces. The surface areas follow BBK 04?s and Eurocode 2?s demand for surface roughness.  A smooth surface will be completed in order to confirm if the different shapes influence the bond strength by shear stress or not.                       The purpose of this essay is to measure the bond strength within the shear capacity as well as examine the impact it has on surface roughness and treatment for shear bond.The method used to identify the shear capacity is called L-shaped Push-Off Test.

A today common soil reinforcement method is the installation of lime-cement columns. Lime-cement columns have been used since the 1970?s and have been a useful method for stabilizing soil at great depths. It is mostly used for stabilizing road and railway embankments because the method is economically viable and the columns are easy to install. The total costs for the installation of the lime-cement columns is dependent on the numbers of installed columns, what percentage of lime and cement that has been used and the pattern in which the columns has been installed.

Introduktion/Syfte. Intresset för och användandet av adhesiv cementering av keramiska material har ökat under de senaste åren. Detta har lett till ett ökat intresse att kunna jämföra olika studiers resultat med varandra och därmed har även intresset för att utveckla internationella standarder inom forskning ökat. Syftet med denna studie var att jämföra den adhesiva bindningsstyrkan mellan ett laboratorieframställt material innehållande kvartsmjölsförstärkt epoxyresin (Sipoxy), med emalj och dentin. Detta för att avgöra om Sipoxy kan användas som en standardiserad ersättning istället för tänder i in vitro studier som utvärderar bondade keramiska rekonstruktioner. Material & metod.

I denna uppsats har den musikaliska förändringen i James Bond-temat, sett över de 21 filmer som gjorts fram till denna uppsats genomförande, analyserats och tolkats. Syftet är att dela med mig av mina tankar och analyser om hur temat framförts och utvecklats, samt därmed också bidra till att utveckla kunskapen om James Bond-världen.Efter en litteraturbaserad del, där bakgrunden till James Bond-temats uppkomst behandlas, så analyseras sedan film för film i Bond-serien från Dr. No till Casino Royale. Analysen tar främst upp delarna synkronisering, instrumentering och influenser.Analyserna visar på att James Bond-temat i grund och botten bygger på samma melodi genom alla filmer, men också har förändrats i stor utsträckning i utförandet..

In this report, the risk of cracking in joints and/in adjacent concrete is estimated by checking shear forces in joints and the ratio between the actual maximum principal stress ant the actual strength of the concrete. The shear force has been estimated both by simple methods as well as by two-dimensional calculations. The risk of cracking in the concrete and/or in the joints is estimated with the computer program ConStre. The restraint from a resilient foundation or rock on a young concrete construction is estimated by a simple method that is exemplified. It is shown that the restraint can be neglected in some cases.

Syfte: Syftet är att undersöka sambandet mellan CDS spreaden och bond spreaden, samt att jämföra dessa över tid. Detta genomförs genom att testa för ett kointegrationssamband samt Granger-kausalitet mellan CDS spreaden och bond spreaden för varje enhet som ingår i urvalet, och för olika perioder. Också deskriptiv statistik används. Metod: Kvantitativ metod: Augmented Dickey-Fuller test, KPSS, Engle-Granger test, Johansen-test, Granger kausalitet Teoretiska perspektiv: Prissättningsmodeller för kreditrisk. Arbitragesamband.

This master thesis is intended to give an increased understanding of the stress state in an axle, which is assembled in one of Atlas Copco?s mountain drilling rigs. The main problems investigated were how the axle is affected when the bearing is worn, when the pretension is varied, and how to dimension the axle. Answers to these questions were found by using hand calculations, practical testing and with Finite Element analyzes. The dimensioning of the axle is currently based on the bending stress, but the author?s opinion is that the axle should be dimensioned considering the equivalent stress.

This report is about the shear force design of reinforced concrete according to Europe?s common dimension rules, Eurocode. The purpose is to describe the calculation procedure and the background to the formulas and expressions that occurs. Furthermore results from different calculation methods (hand calculations and computer calculations) will be compared to see how they differ.The goal with this is to go through the parts of Eurocode dealing with shear force and that this will lead to a clear review of these. You should also be able to see how results and the calculation procedure differ between different calculation methods.

This report is about the shear force design of reinforced concrete according to Europe?s common dimension rules, Eurocode. The purpose is to describe the calculation procedure and the background to the formulas and expressions that occurs. Furthermore results from different calculation methods (hand calculations and computer calculations) will be compared to see how they differ.The goal with this is to go through the parts of Eurocode dealing with shear force and that this will lead to a clear review of these. You should also be able to see how results and the calculation procedure differ between different calculation methods.

The present study examines a new production line of glue-laminated wood (glulam). The glulam is produced from non-planed boards of spruce, which also is convex, that is pressed together with high pressure during the gluing. According to a economic calculation, the material has a economical potential mainly on account of the absent planning. The study mainly found out that the shear strength of the material tolerated the demanded values in standard SS-EN 386, but the delaminating values did not. Since there are more areas to be studied around the material, the prospect to achieve the right delamination values is seen as positive..

Introduction: A complex interaction between muscles, tendons, bones, joints and nerves are required for optimal function of the human hand. It is known that an individual?s grip strength is vital for performance of physical demanding tasks such as strength training with free weights. Strength training including a thicker grip around the bar may enhance the strength of the grip in the athlete without other special routines for grip strength development. The purpose of this investigation was to examine the difference in performance in multiple repetitions in two strength training exercises using two different sizes on the bar, to look for correlations between grip strength of the subjects hand and the amount of repetitions executed with two different size of the bar and finally the correlation of hand size and the amount of repetitions executed with two different size of the bar.Method: 15 strength training men (23,9 ± 4,1 years), underwent measurements of hand size, maximum grip strength, 1 repetition maximum (1RM), a 80 % of 1RM weight strength test with two different  bar sizes.Results: The results from the present investigation indicates a 21,1 % reduction of 80 % of 1 RM weight performance in repetitions executed in the bench press with the thicker diameter of the bar and a 66,2 % reduction in repetitions executed with a 80 % of 1 RM weight in the lying bench row with the thicker diameter of the bar.

Skador och slitage på brokonstruktioner av betong beror på tösalter, armeringskorrosion och frostcykler i kombination med ökande trafiklaster. Den i särklass vanligaste reparationsåtgärden för dessa typer av skador är att göra en pågjutning. Metoden går ut på att först avlägsna det skadade eller dåliga betongskiktet innan en ny betong pågjuts. För att bedöma hur bra ett pågjutningsarbete är behöver vidhäftningen mellan den nya pågjutningen och gamla betongen fastställas. Den mest använda metoden för detta syfte är s.k.

Crossfit is a recently developed form of training which is based on a number of functional resistance exercises performed at high intensity, often to the point of muscular failure. Crossfit has since its introduction 30 years ago, reached vast popularity all around the world, including Sweden. Its practitioners considers Crossfit to be an effective training method for achieving a functional and total trained physique thru improvements in VO2max, muscle strength, endurance, balance and speed. Few scientific studies has been published in the subject which is why this study sets out to examine the effect of Crossfit on VO2max (measured with Åstrands submaximal cyclingtest), maximal strength capacity in lower- and upper body muscles (measured with 1 RM tests in bench press and leg press), rapid strength capacity and strength endurance capacity in upper body muscles (measured with push-up test in 30 seconds) and explosive strength capacity in lower body muscles (measured with sergeant jump test). Five women with an average of 33(±5) years of age all new to Crossfit, performed these tests at two separate occasions with a training period of four weeks consisting of 12(±3,67) Crossfit sessions in between.The result showed a significant improvement in the maximal strength capacity of the leg extension muscles (p=0,025).

?I uppsatsen utreds Adjudication Bond, vilket i Sverige är en ny typ av bankgaranti. För attbedöma denna görs en jämförelse med hur bankgarantier som rättsligt institut förhåller sigtill svensk rätt. Bankgarantier används både i Sverige och internationellt. De utgör säkerhetför ett underliggande avtals riktiga fullgörelse.

Multiple sclerosis (MS) is one of our most common neurological diseases. The development of the disease often make the affected persons live with it for a long time. There are two types of the disease, the first is a progressive type and the other is relapsing remitting. Strengthening exercises isn?t commonly used as a treatment method although muscle weakness and fatigue are common symptoms.